Brownells 5 Chamfer Cutter. Super gentle angle as currently used by Ruger on their .38/.357 DA guns. If you set back a Ruger barrel or just want to duplicate this angle on any other barrel, use this cutter. You CANNOT use 18deg or 11deg cutters on a 5deg throat without exceeding maximum throat diameter or making a compound angle.

Brownells 5 Chamfer Cutter

Firearms 5 Chamfer Cutter, Gunsmith Tools

Brownells 90 Chamfer Cutter. Another Ron Power “trick-of-the-trade”. Use to adjust barrel/cylinder gap, square the rear barrel face and eliminate high spots. Four Sizes: .540″, for Ruger Security Six, GP-100; S&W K; Colt Mk 3, Official Police; Charter Arms; .560″, for S&W L; .625″, for S&W N; Ruger Blackhawk, Super Blackhawk; .687″, for Ruger Redhawk.

Brownells 90 Chamfer Cutter

Brownells Barrel Chamfering Plug Gauges. There is a very narrow, throat diameter range where maximum accuracy is obtained. Go smaller or larger and accuracy will suffer. By simply slipping the Plug Gauge into the barrel throat, itX’Xs possible to tell at a glance when you are approaching the correct diameter. Warns you before you go too far. Also valuable as a diagnostic tool for guns brought in with accuracy complaints, . Each gauge is self-piloted, precision-ground, hardened and stepped to show minimum and maximum optimum diameters. 11deg and 18deg Gauge measures both chamfer angles. Sizes .22RF;

Brownells Barrel Chamfering Plug Gauges

Brownells Barrel Set-Back Fixture. Properly fit new factory or bull barrels, or set back existing barrels to adjust barrel/cylinder gap, without a lathe.

Brownells Barrel Set-Back Fixture

Brownells Beretta Grip Bushing Staker. Fits inside the grip frame and allows secure grip bushing staking without risking frame damage. Matches the factory stake.

Brownells Beretta Grip Bushing Staker
Virtual Private Network

Virtual Private Network for the Internet if you don't want to be always tracked